WPSApp checks the security of your network using WPS protocol.
This protocol allows you to connect to a WiFi network using an 8-digit pin number that usually is predefined in the router, the problem is that the pin of many routers from different companies is known or is known how to calculate it.
This app uses these pins to try the connection and check if the network is vulnerable. It implements several known algorithms for pin generation and some default pins. Also calculates default key for some routers, allows you to view WiFi passwords stored on the device, scans the devices connected to your network and analyzes the quality of the WiFi channels.
Use is very simple, when scanning networks around us, you will see networks with a red cross, these are “secure” networks, they have disabled the WPS protocol and default password is unknown.
Those that appear with a question mark have enabled the WPS protocol, but the pin is unknown, in this case the application allows you to test the most common.
Finally, those with a green tick are most likely vulnerable, have the WPS protocol enabled and the connection pin is known. It may also be that the router has WPS disabled, but the password is known, in this case it also appears in green and can be connected to the key.
You just need to be a Root user to see the passwords, to connect on Android 9 and for some extra function.NOTICE: Not all networks are vulnerable and that the network appears as such does not guarantee 100% that it is, several companies have updated firmware of their routers to correct the fault.
Do you want to know if your Wireless Access Point is vulnerable to the WPS protocol?
Wps Wpa Tester is the app that you need!
With this app, you can try the connection to an Wi-Fi Access Point via WPS PIN.
PINs are calculated with several algorithms throught MAC Address and there are others PINs included in a local database for many Access Point.Luckily just a small part of Wireless Access Point are vulnerable to WPS protocol.
If you will find out that your Access Point has WPS protocol enabled, we suggest to disable it.
The purpose of the app is educational to let the customers know about vulnerability of their own Access Point.